FrSky lipo voltage sensor will be available soon!
Measurement range: 1S~6S (The first lipo voltage should be more than 3.55V)
Cell voltage display range: 0.20~4.20V
Voltage display resolution: 0.01V
Voltage detection precision: 0.03V
Current of the board: 15.5mA
Operating temperature range: -30℃~70℃
Pixel: 128*64 with OLED display screen
2. Set Up
2.1 FrSky Lipo Voltage Sensor can be used alone as a lipo voltage checker. It detects and displays total voltage and cell voltages as connected on OLED display screen.
2.2 Two FrSky Lipo Voltage Sensors can be combined to detect at most 12S.
2.2.1 How to detect and display 1S~6S
2.2.2 How to detect and display at most 12S
2.3 Connect FrSky Lipo Voltage Sensor to sensor hub by provided cable, Data Screen-3 of FLD-02 and Data
Screen-3 of DHT-U display total voltage and cell voltages as connected. (see﹡Note below)
1 If FLVS-01 serves as a lipo voltage checker, please refer to above Section 2.1.
2 If FLVS-01 works with sensor hub and FLD-02/DHT-U to monitor and display total voltage and cell voltages, sensor hub and DHT-U need to be upgraded to version2.0. Current FLD-02 displays 6S at most, and it needs a new firmware to display 12S. More details will follow soon.