| Details | File Size | Download |
|---|---|---|
| UpdateTime : 2022-03-01 Version : 20220301 |
6.22MB | DOWNLOAD |
MANUAL
FIRMWARE
FIRMWARE FOR NFC POWER SWITCH
LUA SCRIPT - OPENTX
FrSky FreeLink APP (PC)
MANUAL
FIRMWARE
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2022-04-21 | 20220412 | 1. Supports two different modes (12CH and LUA) to enter the self-check mode. 2. Compatible with TANDEM receivers. 3. Fix the issue that CH17 to CH24 would not work under stabilization mode. |
166KB | DOWNLOAD |
| 2022-03-11 | 20220124 | 1. Independently dual Configurable BEC Output 2. Dual Power Balancing Consumption 3. Customized Pin Mapping in Stabilization Mode Note: 1. In stabilization mode, do not change the PinMAP of CH9 ~ CH12. Otherwise, the calibration mode cannot be triggered. 2. In stabilization mode, the receiver PIN1~PIN6 always outputs CH1-CH6 data(the PinMAP setting for PIN1-PIN6 is invalid). |
166KB | DOWNLOAD |
FIRMWARE FOR NFC POWER SWITCH
| UpdateTime | Version | Notes | File Size | Download |
|---|---|---|---|---|
| 2022-02-10 | 20220208 | Unified LED state when used with different equipment. | 48KB | DOWNLOAD |
LUA SCRIPT - OPENTX
| UpdateTime | Version | Note | File Size | Download |
|---|---|---|---|---|
| 2022-03-11 | v2.0 | Add support for RB30+. | 153KB | DOWNLOAD |
| 2021-02-03 | v1.02 | LUA files for the radios running OpenTX. Add calibration command for current sensor. |
154KB | DOWNLOAD |
| 2020-09-27 | v1.01 | LUA files for the radios running OpenTX. Fix the issue that Lua cannot work with radios with the XJT module. |
153KB | DOWNLOAD |
FrSky FreeLink APP (PC)
| Details | Note | File Size | Download |
|---|---|---|---|
| Compatiblity : STK / S.Port AirLink / S.Port AirLink S UpdateTime : 2022-02-15 Version : 3.5 |
Update for Xact servos . | 4.74 MB | DOWNLOAD |
